This is an old revision of the document!
Table of Contents
Mitel 6xx c/d Handsets
The Handset Series 6xx are the native handsets for the Mitel SIP-DECT Infrastructure.
There are currently the following models:
| Handsetname | Color display | Vibration motor | Bluetooth | proprietarySD slot | USB port | IP65 | CATiq | Latest firmware | HW revision |
|---|---|---|---|---|---|---|---|---|---|
| 610d | ❌ | ❌ | ❌ | ❌ | ❌ | ❌ | 5.0.0.SP5 | 2 | |
| 620d | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | 5.0.0.SP5 | 2 | |
| 630d | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | 5.0.0.SP5 | 2 | |
| 650c | ✅ | ? | ? | ? | ? | ? | ✅ | ? | ? |
| 612d | ✅ | ❌ | ❌ | ❌ | ❌ | ❌ | 7.4.5 | 3.0.v2.6.12 | |
| 622d | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | 7.4.5 | ? | |
| 632d | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | 7.4.5 | ? | |
| 612dV2 | ✅ | ❌ | ❌ | ❌ | ❌ | ❌ | 7.4.5 | 4.0.v2.6.12 | |
| 622dV2 | ✅ | ✅ | ✅ | ✅ | ✅ | ❌ | 7.4.5 | 4.0.v2.6.22 | |
| 632dV2 | ✅ | ✅ | ✅ | ✅ | ✅ | ✅ | 7.4.5 | ? |
DECT Infrastructure measurements
Receive strength indicator
Maybe all handsets support enabling a test mode for testing the receive strength of up to 4 dect base stations.
- Go into the menu
- Type * * * 7 6 #
- You are seeing the “Service” menu now.
- Firmware 5.0.0SP5
- Enable “site survey”
- Firmware 7.4.5
- Go into submenu “Test/Trace”
- Enable “site survey”
DECT Measure Mode
It is also possible to display all surrounding dect base stations in firmware 7.4.5.
- Go into the menu
- Type * * * 7 6 #
- You are seeing the “Service” menu now.
- Go into submenu “Test/Trace”
- Go into “DECT Measure Mode”
Test/Trace menu structure
Handsets with the 7.4.5 firmware can be switched into a test/trace mode. The default menu structure will be replaced with a menu structure suitable for testing and measurement.
- Go into the menu
- Type * * * 7 6 #
- You are seeing the “Service” menu now.
- Go into submenu “Data management”
- Change “Menu structure” to “Test/Trace”
USB-Port
The phone can be charged (slowly) with power through the usb port.
The USB-Port can be used to transfer the phonebook or update the firmware.
SD-Card slot
The SD card needs to be specially formatted by Mitel. It contains a new DECT portable part identifier. The SD card will be used by the phone to store all configuration and user data including the identifier on the sd card.
Anyone out there with an image of such an sd card?