====== LED States ======

The new RFP family is equipped with one colored LED, which shows the individual states of the 4th generation RFP.

    LED color/rhythm.     |  Description
  --------------------------------------------------------------------------------
       red continuous     |  Boot phase
    yellow continuous     |  Kernel boot phase
  yellow 1s   | grey 1s   |  Configuration phase
  yellow 1.9s | grey 1.9s |  DHCP failure (idle loop)
   magenta continuous     |  System up and Running (with or without OMM ) 
   white 1s   | grey 1s   |  OMM connection phase
     white continuous.    |  OMM connected
     green 1s | grey 1s   |  DECT inactive (not synced yet)
     green continuous     |  DECT “on air”
      blue continuous     |  WLAN “on air”
    cyan 1s   | grey 1s.  |  DECT inactive (not synced yet) + WLAN “on air”
      cyan continuous     |  DECT + WLAN “on air”
   green 0.1s | grey 0.1s |  Button pressed : 0 sec < t < 3 sec = no action
    blue 0.1s | grey 0.1s |  Button pressed : 3 sec < t < 8 sec = Activate Cloud-Id
   green 0.1s | grey 0.1s |  Button pressed : 8 sec < t < 10sec = no action
     red 0.1s | grey 0.1s |  Button pressed : 10 sec < t < 15 sec = Factory Reset
   green 0.1s | grey 0.1s |  Button pressed : 15 sec < t < oo = no action
   
   
===== Reset =====

To reset press reset button (on the back behind the hole) until the light flashes red/grey (will cycle through different modes/colors). If you miss the red, keep pressing, it will return to red after some time.